Blower Fan Medical 48mm Small Size 5kpa Pressure 130lpm Airflow Brushless Mini 12 VDC Blower Fan

We strive to be the preferred partner of our customers with first-class cost performance of our medical air blower, 2 inch blower, high pressure air blowers, and we look forward to cooperating with you sincerely and creating brilliance together! The company gave full play to its own advantages, completed many national key projects, and has extensive influence in the industry. Looking forward to the future, we will continue to deepen our research and development capabilities and operate steadily with steady steps. We really have to care about our employees and our customers and consider the interests of the larger community before we make any decisions. We focus on long-term development and do not harm the value of customers because of commercial interests.

60mm diameter 7kpa pressure Mini respirator centrifugal quiet inspirator ventilator cpap blower suitable for air cushion machine/CPAP machine/fuel cell/medical equipment.

(1)WS7040-24-V200 blower is with brushless motors and NMB ball bearings inside which indicates very long life time; MTTF of this blower can reach more than 20,000 hours at 20 degree C environmental temperature.

(2)This blower needs no maintenance

(3)This blower drived by a brushless motor controller have many different control functions such as speed regulation,speed pulse output,fast acceleration, brake etc.it can be controlled by intelligent machine and equipment easily.

(4) Drived by brushless motor driver the blower will have over current, under/over voltage,stall protections.

This blower can be widely used onto air cushion machine, CPAP machine, SMD soldering rework station.

What are BLDC Fans?
BLDC fans are those in which BLDC motors are utilized in replacement of standard induction motors.

BLDC motors can reduce power consumption by up to 65% as compared to ordinary induction motors.

A BLDC fan's lifespan is also more than an ordinary ceiling fan as there is no heat generated in the BLDC motor; hence, it increases ceiling fan bearings' lifespan. Additionally, there are very few chances for

winding failure due to the high thickness of the copper wire used in the winding.

This blower can run at CCW direction only.Reverse the impeller running direction can not change the air direction.

Filter onto the inlet to protect the blower from dust and water.

Keep the environmental temperature as low as possible to make the blower lifetime longer.

Q: Customer: May I use this blower for Medical device?

A: Yes, this is one blower of our company which can be used on Cpap and ventilator.

Q: What’s is the maxmum air pressure?

A: As it shown in the drawing, the maxmum air pressure is 6.5 Kpa.

Compared with DC motor and asynchronous motor, the key technical characteristics of Brushless DC motor are:

1.The operating characteristics of DC motor are obtained by electronic control. It has better controllability and wide speed range.

2.Rotor position feedback information and electronic multiphase inverter driver are needed.

3.Essentially, AC motor can work at high speed without spark and abrasion of brush and commutator. It has high reliability, long working life and no need of maintenance.

4.Brushless DC motor has high power factor, no loss of rotor and heat, and high efficiency: compared with data, the efficiency of 7.5 kW asynchronous motor is 86.4%, and the efficiency of the same capacity brushless DC motor can reach 92.4%.

5.There must be electronic control parts, the total cost is higher than the DC motor.

There are mainly two kinds of motors used in AC system: induction motor and permanent magnet synchronous motor. Permanent magnet synchronous motor can be divided into sinusoidal back EMF permanent magnet synchronous motor (PMSM) and square wave back EMF brushless DC motor (BLDCM) according to different working principle. So that their driving current and control mode are different.

The back EMF of sinusoidal permanent magnet synchronous motor is sinusoidal. For the motor to produce smooth torque, the current flowing through the motor winding must be sinusoidal. Therefore, the continuous rotor position signal must be known, and the inverter can provide sinusoidal voltage or current to the motor. Therefore, PMSM needs to adopt high voltage or current. The resolution of the position encoder or resolver is also very complicated.

BLDCM does not need high-resolution position sensor, the feedback device is simple, and the control algorithm is relatively simple. In addition, the air gap magnetic field of BLDCM trapezoidal wave is more efficient than that of PMSM sinusoidal wave, and the power density of BLDCM is higher than that of PMSM. Therefore, the application and research of permanent magnet brushless DC motor has received more and more attention.

We have many years of research and development history, advanced technology, mature and stable products, thus ensuring that the Blower Fan Medical 48mm Small Size 5kpa Pressure 130lpm Airflow Brushless Mini 12 VDC Blower Fan have advanced processes and also have good applicability. We are committed to achieving high efficiency in safe production, recycling of resources, harmless production waste and reduction of carbon emissions, and building a resource-saving and environment-friendly enterprise. Our company follows the enterprise mission of 'honest management, innovation and win-win'.