OEM 25X25X10mm High Speed DC Brushless Motor 2510 12V Fan Electric Axail Cooling Fan

Through continuous focus and innovation in the Home Appliance Blower, small industrial exhaust blowers, bipap blower motor field, our company continuously improves organizational capabilities, thereby creating greater value for customers. We hope that our employees will take their existing positions as a platform to work and show their talents, strictly implement the decisions and deployments, and complete the tasks without compromise. Looking to the future, we will continue to adhere to the corporate culture of diligence and integrity, openness and sharing, innovation and efficiency. Our company insists on strengthening brand building and formulating strict production standards, quality supervision and brand supervision mechanism.

60mm diameter 7kpa pressure Mini respirator centrifugal quiet inspirator ventilator cpap blower suitable for air cushion machine/CPAP machine/fuel cell/medical equipment.

(1)WS7040-24-V200 blower is with brushless motors and NMB ball bearings inside which indicates very long life time; MTTF of this blower can reach more than 20,000 hours at 20 degree C environmental temperature.

(2)This blower needs no maintenance

(3)This blower drived by a brushless motor controller have many different control functions such as speed regulation,speed pulse output,fast acceleration, brake etc.it can be controlled by intelligent machine and equipment easily.

(4) Drived by brushless motor driver the blower will have over current, under/over voltage,stall protections.

This blower can be widely used onto air cushion machine, CPAP machine, SMD soldering rework station.

What are BLDC Fans?
BLDC fans are those in which BLDC motors are utilized in replacement of standard induction motors.

BLDC motors can reduce power consumption by up to 65% as compared to ordinary induction motors.

A BLDC fan's lifespan is also more than an ordinary ceiling fan as there is no heat generated in the BLDC motor; hence, it increases ceiling fan bearings' lifespan. Additionally, there are very few chances for

winding failure due to the high thickness of the copper wire used in the winding.

This blower can run at CCW direction only.Reverse the impeller running direction can not change the air direction.

Filter onto the inlet to protect the blower from dust and water.

Keep the environmental temperature as low as possible to make the blower lifetime longer.

Q: Customer: May I use this blower for Medical device?

A: Yes, this is one blower of our company which can be used on Cpap and ventilator.

Q: What’s is the maxmum air pressure?

A: As it shown in the drawing, the maxmum air pressure is 6.5 Kpa.

Compared with DC motor and asynchronous motor, the key technical characteristics of Brushless DC motor are:

1.The operating characteristics of DC motor are obtained by electronic control. It has better controllability and wide speed range.

2.Rotor position feedback information and electronic multiphase inverter driver are needed.

3.Essentially, AC motor can work at high speed without spark and abrasion of brush and commutator. It has high reliability, long working life and no need of maintenance.

4.Brushless DC motor has high power factor, no loss of rotor and heat, and high efficiency: compared with data, the efficiency of 7.5 kW asynchronous motor is 86.4%, and the efficiency of the same capacity brushless DC motor can reach 92.4%.

5.There must be electronic control parts, the total cost is higher than the DC motor.

There are mainly two kinds of motors used in AC system: induction motor and permanent magnet synchronous motor. Permanent magnet synchronous motor can be divided into sinusoidal back EMF permanent magnet synchronous motor (PMSM) and square wave back EMF brushless DC motor (BLDCM) according to different working principle. So that their driving current and control mode are different.

The back EMF of sinusoidal permanent magnet synchronous motor is sinusoidal. For the motor to produce smooth torque, the current flowing through the motor winding must be sinusoidal. Therefore, the continuous rotor position signal must be known, and the inverter can provide sinusoidal voltage or current to the motor. Therefore, PMSM needs to adopt high voltage or current. The resolution of the position encoder or resolver is also very complicated.

BLDCM does not need high-resolution position sensor, the feedback device is simple, and the control algorithm is relatively simple. In addition, the air gap magnetic field of BLDCM trapezoidal wave is more efficient than that of PMSM sinusoidal wave, and the power density of BLDCM is higher than that of PMSM. Therefore, the application and research of permanent magnet brushless DC motor has received more and more attention.

Each process has strict quality standards, which have been checked at various levels, so that the quality of our OEM 25X25X10mm High Speed DC Brushless Motor 2510 12V Fan Electric Axail Cooling Fan has been fully guaranteed. We are sure our successful experience in tool production will win customer's trust, Wish to co-operate and co-create a better future with you! After years of growth and exploration, our company clearly has its own development goals and directions.