High-pressure fans need to pay attention to the following issues in use to avoid damage and use impact due to improper use or improper consideration.
1. Voltage situation
Pay attention to the stability of the voltage during use, especially in some remote areas or places close to the power generation area. If it is unstable, you can install a voltage stabilizer or a protector.
2. Surrounding environment
The high-pressure fan should be installed in a dry and clean place. If the surrounding environment is not good, filtering equipment is needed. If it absorbs water vapor, it needs to install oil vapor separation equipment. Liquid and high concentration are not allowed to enter the fan directly.
3. Load situation
Regarding the load, each high-pressure fan has a rated current on the nameplate. No matter what type of fan, long-term overload operation is not allowed. If the current is too high, it means that the resistance is too large, or the model is selected small, resulting in small The horse-drawn cart, if things go on like this, there will be problems.
4. Pay attention to fever
If the high-pressure fan generates a lot of heat when in use, you need to check what it is. Generally, the intake air temperature is recommended to be within 60 degrees and the front pump head within 110 degrees.
In other cases, such as vibration, if the vibration is too large, you can check whether the bearing has reached the end of its service life and replace it with a new one.
