When the construction needs to be cleaned or there are other needs, the auxiliary work of the high-pressure blower is required to complete, and the overall efficiency of the high-pressure blower is still good. It can operate stably and achieve a high degree of removal, which is a good operating tool. Let me talk about a sequence of installing high-pressure blowers:
1. The first is to inspect all parts of the product to see if there are any defects and if there is a thin layer of butter on both sides of the paper pad.
2. When the frame is in the oil seal, it must be optimistic whether it is filled with butter, then put the butter into the pump seat, and then install the bearing, and add a certain proportion of butter to the bearing.
3. The seal ring on the shaft sleeve must also be greased with butter.
4. The bearing is integrated on the motor, and a certain proportion of butter should be injected; after that, paper pads, oil retaining rings, etc. are placed, arranged in order and fixed with screws.
5. Put on the paper pad and lay the pump seat bushing flat on the fittings.
6. Use a wooden hammer or something that can be knocked to hit the pump head so that the shaft is against the bearing. Until the impeller is waved with one hand to make it rotate flexibly.
7. Put down the paper pad, install the pump casing and fix it with screws and install the filter. Then use your fingers to wave the impeller to be able to rotate flexibly.
A sequence of removing the high-pressure blower:
1. Remove the motor or the fixed plate and the air outlet.
2. After removing the volute and the leaf nut, the impeller
3. Disassemble the motor base to separate it from the support tube.
Disassemble and install in order. It is strictly forbidden to use hammers to beat during installation or disassembly of the high-pressure blower, so as not to damage the quality of the device and the performance of the whole machine. The above is a step to correctly install and remove the high-pressure blower. If users have different purposes, they can also use different methods to configure.
