How to use high-pressure fans efficiently

The pressure generated by the high-pressure fan is very high, because the internal air is constantly squeezed and compressed, so the airflow is very strong.

However, the efficiency is relatively low when used, and cannot reach 100%. This is also the key direction of research and development by some factories in the future.

Although this is the case, how can we improve its efficiency in use? Is there any other way to avoid such problems.

Although high-pressure fans cannot be avoided, we can only try to avoid extra efficiency losses from the early stage of installation and use.

For example: When connecting the pipe, do not connect too long or too thin. If it is too long, it will inevitably increase its resistance and loss. Do not install a too thin tube, the same is true.

Do not install too many elbows, especially the 90-degree elbows with relatively large bends, so that they are less used and reduce the waste and loss of resources. Ensure smooth ventilation or delivery.

The inlet of the high-pressure fan should be kept smooth, and there should be no debris blocking the incoming product, which will affect the entry of air, increase the loss of the motor and reduce the efficiency. This is a very common problem.

Many customers say how the air volume is getting smaller and smaller. Looking at the imported filter, there are too many debris and dust accumulated in it, which affects the entry of the fan and increases the resistance. Naturally, the use efficiency is also high. Discounted.

There will be losses in the efficiency of every type of equipment. These are normal phenomena, just a matter of size.